The NAUTILUS has a four-stage adjustable draft. This evaporator is equipped as standard with the patented ASPIRE BVC (= Bottom Vertical Coils or vertical winding on the bottom of the evaporator). This vaporizer is made of stainless steel and the tank is made of pyrex glass. The drip-tip is removable and can be exchanged flexibly thanks to the standard drip-tip connection. The evaporator also has a flexibly mounted positive pole, so that no battery can cause contact problems. Of course, we recommend ASPIRE batteries for this vaporizer, because together they result in a visually appealing design.
For the Nautilus there are two different coils in the BVC design patented by ASPIRE (= Bottom Vertical Coil or vertical winding on the bottom of the evaporator) with the values ??1.6 Ohm (3.3 - 5 Volt or 7 - 13 Watt) and 1.8 ohms (3.3 - 6 volts or 7 - 15 watts). Before vaping, please let the vaporizer stand upright briefly after each filling with liquid (3-5 minutes) so that the cotton wool can soak up the liquid. An additional note on the closure of the liquid tank, please only tighten the threads by hand. Thanks to the large silicone seal, no great effort is required, on the contrary, this can lead to damage (sticking) to the device.
Replacement tank housings are available as accessories for the NAUTILUS, with which the evaporator can be optically modified. Since the case is made of stainless steel, the tank is also better protected against damage (due to a fall, for example).
Length: 83.6mm Tank
Material: Stainless steel, pyrex glass
Winding type: BDC (standard) / BVC (accessories)
Battery connection: 510 screw thread (sprung)
Available evaporator heads:
1.6 ohms 3.3 - 4.2 volts (7 - 12 watts)
1.8 ohms 4.2 - 5 volts (7 - 14 watts)
NEW 0.15 ohms for temperature control (Ni200)
NEW 1.2 ohms 15 - 20 watts
NEW 1.8 ohms 13 - 16 watts (CLAPTON)